Audioscan Verifit 2 Bedienungsanleitung PDF herunterladen (Seite 95)

Verifit

User's Guide Version 4.2 © June 2015

Click on to save your selections.

Test box calibration facts

Test box microphone calibration establishes a correction curve for each uncalibrated test box reference

microphone by comparison with the factory calibrated coupler microphone. It may be performed as often as

desired but will be invalidated at 12 am the following day or at 12 am the following Monday, depending on the

choice of Daily or Weekly calibration interval. After the calibration has expired, the message window will turn

blue and you will be prompted to calibrate whenever you attempt a test that uses the test box microphones.

Your calibration curve should be similar to the one shown but may be at a different level. It should remain stable

over time. Irregularities in the calibration curve may be the result of not properly aligning the microphones. See

Calibrating test box reference microphone.

Calibrating test box reference microphone

Remove any coupler from the coupler microphone before calibration.

1. Position the test box reference microphones with their openings concentric with the binaural coupler

microphone openings and about 1 – 2 mm from as shown below.

2. Close and seal the test chamber.

3. Right-click the mouse and click [Calibration] under Test box.

4. Click [Daily] or [Weekly] to select the calibration interval.

5. Click [Calibrate] for each side. See Test box calibration facts

It is recommended that you print a copy of the initial calibration curve and compare it with your daily or weekly

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 155 156

Keine Kommentare

Audioscan Verifit 2 Bedienungsanleitung Seite 95